Google Search

Search

Already a Member ?

Best Business Opportunities in West Bengal- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mineral: Project Opportunities in West Bengal

PROFILE:

A mineral is a naturally occurring solid chemical substance formed through biogeochemical processes, having characteristic chemical composition, highly ordered atomic structure, and specific physical properties. India is one of the world's most naturally endowed lands. India is home to numerous minerals which benefit the country economically. The minerals produced in India constitute one-quarter of the world's most popular mineral resources.

RESOURCES:

West Bengal stands third in the country in terms of mineral production. The state contributes about one-fifth to the total production of minerals in the country. Coal constitutes 99% of the minerals extracted in West Bengal; fireclay, china clay, limestone, copper, iron, wolfram, manganese and dolomite are mined in small quantities. There are good possibilities of obtaining mineral oil and natural gas in the areas near the Bay of Bengal.

West Bengal is the third largest state for coal production, accounting for about half of India's total. Lignite mined in Darjeeling is used to make briquettes. West Bengal ranks next to Bihar and Madhya Pradesh in production of fireclay. China clay used in the pottery, paper, textile, rubber and paint industries are unearthed at Mohammad Bazar in Birbhum and Mejia in Bankura. Limestone which is used in cement industry is mined in Bankura, Purulia, Darjeeling and Jalpaiguri. There are copper mines in Jalpaiguri and Darjeeling. Small quantities of low quality iron-ore are mined in Bardhaman, Purulia, Birbhum and Darjeeling. There are manganese in the Jhargram region of Paschim Medinipur, Purulia and Bardhaman. The state’s production of dolomite comes from the Dooars region of Jalpaiguri.

GOVERNMENT POLICIES:

Keeping pace with the liberalised Mineral Policy being adopted by the Government of India, Government of West Bengal has formulated its Mineral Policy in 2002. Among the basic objectives of the West Bengal Mineral Policy, 2002 following are worth mentioning:

1. To review the existing State monopolies over mineral exploration and wherever required, go in for selective de-reservation.

2. To invite private capital, resources and technology, both foreign and domestic, for better exploration and exploitation;

3. To promote necessary linkages for smooth and uninterrupted development of mineral based industries to meet the needs of the State.

4. To ensure proper vigilance and supervision of mining activities with particular emphasis on simplification of procedures and greater generation of revenues from mineral resources.

5. To develop industry friendly facilities in specific minerals like, Coal, Granite and China Clay and in Natural gas like Coal bed Methane.

 

Iron and Steel: Project Opportunities in West Bengal

PROFILE:

India has one of the richest reserves of all the raw materials required for the industry, namely land, capital, cheap labour, iron ore, power, coal etc. Yet India is 5th in the world ranking for production of steel. Iron and steel is basis for laying the vibrant Indian industry. Production of steel has come to exist as an index of a country's potential, industrial and economic growth. The making of iron and steel had been known to the people of India since long. The iron pillar of Delhi is a proof of it and speaks of the quality of steel produced in this country in ancient times. The steel industry is often considered to be an indicator of economic progress, because of the critical role played by steel in infrastructural and overall economic development. The per capita usage of steel gives an indication of the technological advancement of a nation.

RESOURCES:

The growth of steel industry in the State is largely related to the proximity of raw materials, skilled manpower, port facilities and the vast market for steel products. Given these location advantages, large numbers of mini integrated steel plants have already been set up in the state manufacturing a wide range of products such as sponge irons, mild steels, iron pipes etc. The neighbouring Eastern States of India viz. Jharkhand, Orissa and Chattisgarh are endowed with huge iron ore reserves along with cooking coal and non-cooking coal. The establishment of Bengal Iron Works at Kulti in Burdwan district of West Bengal in 1870 where the first commercial blast furnace was set up in 1875 heralded the commencement of this industry in the State.

The easy availability of power, competitive rates of freight, close proximity to areas with natural resources relevant to the industry, and labour force traditionality skilled in operating iron and steel units are factors that have influenced the surge in investment in this sector.

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Leather: Project Opportunities in West Bengal

PROFILE:

Leather Industry occupies a place of prominence in the Indian economy in view of its massive potential for employment, growth and exports. There has been increasing emphasis on its planned development, aimed at optimum utilisation of available raw materials for maximising the returns, particularly from exports.  The Indian leather sector meets 10% of global finished leather requirement. The leather industry is spread in different segments, namely, tanning & finishing, footwear & footwear components, leather garments, leather goods including saddlery & harness, etc.

RESOURCES:

West Bengal has been functioning as a vast raw material resource base for the leather industry in the form of hides and skins. However, Indian leather export has undergone a transition from the export of raw hides and skins in the fifties to value added finished leather in the nineties. In the context, leather processing industries in West Bengal needed a strong structural support and proposal was mooted for setting up an eco-friendly complex near Calcutta with modern technical and training facilities. In this full scale integrated leather complex, facilities for leather-finishing, computer-aided design centres, modern training centre for up gradation are also being provided. This mega complex will also have manufacturing units to produce footwear uppers, finished foot wears, leather goods and garments to catering to the expanding domestic and export markets. The availability of a wide range of cost effective leather chemicals with consistent quality is crucial for the success of such a mega complex. Entrepreneurs can set up manufacturing units in the mega complex for both tanning chemicals and post-tanning chemical auxiliaries.

 

GOVERNMENT POLICIES:

Government policies in support of the industry are:

• The entire leather sector is now de-licensed and de-reserved, paving way for expansion on modern lines with state-of-the art machinery and equipment

• 100% Foreign Direct Investment and Joint Ventures permitted through the automatic route

• 100% repatriation of profit and dividends, if investments made in convertible foreign currency. Only declaration to this effect to the Reserve Bank is required.

• Promotion of industrial parks (one leather park in Andhra Pradesh, one leather goods park in West Bengal, one footwear park in Tamil Nadu and one footwear components park in Chennai).

• Funding support for modernizing manufacturing facilities 

• Funding support for establishing design studios

• Duty free import of raw materials (namely raw skins, hides, semifinished leather and finished leather) and of embellishments and components under specific scheme

• Concessional duty on import of specified machinery for use in leather sector

• Duty neutralization / remission scheme 

 

Petrochemicals: Project Opportunities in West Bengal

PROFILE:

The petrochemical industry in India has been one of the fastest growing industries in the country. Since the beginning, the Indian petrochemical industry has shown an enviable growth rate. This industry also contributes largely to the economy of the country and the growth and development of manufacturing industry as well. It provides the foundation for manufacturing industries like construction, packaging, pharmaceuticals, agriculture, textiles etc.    

RESOURCES:

The state of West Bengal accounts for almost 4% of India’s production of petroleum products and 13% of India’s polymer production. The production has almost doubled in the last decade. Crude throughput at Haldia refinery increased to 5,502 million tones and its capacity utilization increased to 91.7% during 2005-06.

The growth of the Petrochemical sector has been very impressive both in terms of units set up and investment volume. The main reason for the recent growth of this industry is due to upstream and downstream industry linkages by the oil refining and petrochemical units set up in the state. The industry is due to receive a further fillip with the announcement of US$ 1 billion gas pipeline project to bring natural gas in the state. Haldia Petrochemicals Ltd. is India’s second largest integrated petrochemical complex. Currently producing 1.5 million tons of polymers and chemicals and has grown significantly to its present turnover of US$ 1.4 billion.

GOVERNMENT POLICIES:

The major thrust areas of the policy are:

•        Encourage public sector companies & nationalized banks to enter the capital market to raise resources & offer new investment avenues.

•        Invite & encourage private sector investment in these industries in order to accelerate growth.

•        Set up Petroleum, Chemical & Petroleum Investment Regions (PCPIR) in the state to promote investment on a global scale.

•        Foreign Technology investments will be invited in the petrochemical industries.

•        Encourage Foreign Equity participation in the petrochemical industries.

 

Food Processing: Project Opportunities in West Bengal

PROFILE:

Indian food processing industry is widely recognized as a 'sunrise industry' having huge potential for uplifting agricultural economy, creation of large scale processed food manufacturing and food chain facilities, and the resultant generation of employment and export earnings. The food processing sector in India is geared to meet the international standards. Food Safety and Standards Authority of India has the mandate to develop standards and also to harmonise the same with International Standards consistent with food hygiene and food safety requirement and to the conditions of India's food industry.

RESOURCES:

West Bengal is one of the three front running states in India in food and agro processing sector. Fruits, vegetables and cereals grow in abundance in West Bengal. The state accounts for 30% of potatoes, 27% of pineapples, 12% of bananas and 16% of India’s rice production. Additionally fruits like mangoes, papaya, guava and jackfruit and vegetables like tomatoes, cauliflowers, cabbage, brinjal, pumpkin, are available in plenty.

West Bengal is the largest producer of rice, pineapple, vegetables and fruits in the country and second largest producer of potatoes and lychees. It ranks 1st in total meat production (including poultry) in the country and accounts for 10% of the country’s edible oil production. It is a substantial producer of spices, coconut, cashew nut, arecanut, betel vine and oilseeds. West Bengal is also one of the leading states in pisciculture since it the largest producer of fish.

GOVERNMENT POLICIES:

Agro & Food Processing Industries form a very important part of the State’s economy. The West Bengal Government is setting up a number of policies & plans to focus on the selected areas like vegetables, fruits, fisheries, rice, poultry, dairy & floriculture. The major thrust areas of the policy are:

•        Increase agricultural production & productivity vertically through wider adoption of appropriate eco-system-specific & cost effective technology.

•        Bring more area under High Yielding Variety (HYV), hybrid & improved varieties of crops.

•        Emphasize increase production of pulses & oil seeds in non-traditional areas & non-conventional seasons.

•        Create employment opportunities in this sector to improve the socio-economic status of the farmers & also to remove sub-regional disparity.

•        Extending soil-testing facilities up to district level for proper use of fertilizer.

•        Post-harvest technology for reducing loss & better marketability.

•        Bring cultivable waste land & fallow land under cultivation.

•        Application of low cost technology for increasing production & productivity.

•        More money involvement in agriculture.

•        Encourage private entrepreneurship for processing of fruits, vegetables & horticultural items.

•        Promote floriculture parks & flower complexes in the state.

•        Other Business Process, knowledge Process and Engineering Process Outsourcing services

The State Government is encouraging the farmers for mechanization through the use of modern agricultural implements & machines for timely farm operation & reduction in the cost of cultivation.

 

Textiles: Project Opportunities in West Bengal

PROFILES:

The Indian textile industry is one of the largest industries in the world. The textile industry in India is the largest provider of employment after agriculture. This industry is one of the earliest industries of India to come into being; it is presently the second biggest industry in the world after China. Over the years, this industry has proved to be the provider of the basic requirements of the people. The industry holds a vital place in the Indian economy as it makes a contribution of 14 % to the industrial production of the country and at the same time sums up 4% of the total GDP of India. Along with contributing to the Indian economic scenario in terms of employment, involvement in the industrial production, foreign revenues the textile industry of India also contributes to the global textile economy. It contributes to the global textile fibre and yarn production.

RESOURCES:

The textile industry of Kolkata plays a significant role in the economy of the capital city of the state of West Bengal. West Bengal has traditionally been a major producer of cotton textile as well in the country. Jute textile manufacturing is the most prominent industry in West Bengal due to availability of raw jute in the state. At present there are 59 Jute mills in West Bengal. Main jute products are Hessian, sacking, jute bags, and other items produced by jute. Most of the jute mills are located on the banks of river Hooghly near Kolkata. West Bengal is the leader and pioneer in the country for the manufacturing of Jute textiles. Hosiery industry in West Bengal has a huge grow potential as Bengal was the birthplace of hosiery industry in India.

GOVERNMENT POLICIES:

The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The government of India has been following a policy of promoting and encouraging the handloom sector through a number of programmes. Most of the schematic interventions of the government of India in the ninth and tenth plan period have been through the state agencies and co-operative societies in the handloom industries. Some of the major acts relating to textile industry include: Central Silk Board Act, 1948, The Textiles Committee Act, 1963, The Handlooms Act, 1985, Cotton Control Order, 1986, The Textile Undertakings Act, 1995 Government of India is earnestly trying to provide all the relevant facilities for the textile industry to utilize its full potential and achieve the target. The textile industry is presently experiencing an average annual growth rate of 9-10% and is expected to grow at a rate of 16% in value, which will eventually reach the target of US $ 115 billion by 2012. The clothing and apparel sector are expected to grow at a rate of 21 %t in value terms.

 

Biotechnology: Project Opportunities in West Bengal

PROFILE

The Indian biotechnology sector is one of the fastest growing knowledge-based sectors in India and is expected to play a key role in shaping India's rapidly developing economy. With numerous comparative advantages in terms of research and development (R&D) facilities, knowledge, skills, and cost effectiveness, the biotechnology industry in India has immense potential to emerge as a global key player. Biopharma and bioservices sectors contributed 63 per cent and 33 per cent, respectively, to the total biotech exports. The bioagriculture, bioindustrials and bioinformatics sectors remained focussed on domestic operations, bringing in nearly 90 per cent of their revenues from India.

RESOURCES

West Bengal has a vast knowledge base with few of the premiers institutes of India located here.          Presence of Kharagpur IIT which over the years have done path breaking research in this sector is a major resource of biotechnology development. It has rich bio diversity, characterized by several species of medicinal & aromatic plants and diverse agro climatic zones. A matrix of 75 deliverable products is ready for commercialization in the agro and medical sector. Increase awareness among people about the adverse side effects of synthetic drags.

GOVERNMENT POLICIES:

The state has been putting efforts to facilitate the growth of biotech industries and development of clean biotech technologies. The various key initiatives under this section include:

•        Conserve bio-diversity through mapping and sustainable use of bio-resources.

•        Create a "Centre of Excellence for Biotechnology" as a high quality support service to Biotech Industries.

•        Facilitate the flow of venture capital funds and bank credit to Biotech companies.

•        Spread general awareness for optimum utilisation of Biotechnology in the agriculture sector.

 

Automobile and auto components: Project Opportunities in West Bengal

PROFILE:

The Indian auto industry has the potential to emerge as one of the largest in the world. Presently, India is second largest two wheeler markets in the world, fourth largest commercial vehicle market in the world. 11th largest passenger car in the world and is expected to be the seventh largest market by 2016. The growth is a reflection of the emergence of India as a global automobile hub with almost all global auto makers having set up plants in India to cater mainly to the domestic market, as also the export market. The Indian auto component industry has kept pace with technological developments and is today catering not only to OEM and Tier I auto makers in India but abroad as well. Many Indian auto part makers have today also succeeded in emerging as the supplier of choice to global auto majors.

RESOURCES:

West Bengal has traditionally been very strong in the engineering industries and has been an important manufacturing base in the past. West Bengal’s Hindustan Motors was one of the pioneers by commencing production of vehicles in the state in the year 1948. Recently it has collaborated with Mitsubishi Company of Japan to diverse into a wide range of cars and manufactures everything related to automobile industry like trekkers, trucks, and also luxury cars like Mitsubishi Lancer and touching a consolidated net sale of US$ 233.47 million in the last fiscal year. West Bengal realizing this huge potential in this sector has geared up with appropriate plans and policies to boost this sector. Also it has got certain inherent competitive advantages since the state is located in the heart of India’s steel and manufacturing cluster.

 

GOVERNMENT POLICIES:

A number of policy initiatives have been taken by the government to facilitate the automotive industry. These include:

•        Permitting 100% FDI in this sector & removal of minimum capital investment norm for fresh entrants.

•        Establishing an international hub for manufacturing small, affordable passenger cars & a centre for manufacturing two-wheelers.

•        Conducting incessant modernization of the industry & facilitate indigenous design, research & development.

•        Leveraging State’s software technology into automotive technology wherever relevant.

•        Encouraging development of vehicles propelled by alternate energy sources.

•        Development of domestic safety & environmental standards at par with the international standards.

•        Emphasis on low emission fuel auto technologies & availability of appropriate auto fuels.

The State is also encouraging dynamic investment in the sector to create an environment for volume production & indigenous capability for small cars & auto parts.

 

Tea: Project Opportunities in West Bengal

PROFILE:

Tea is indigenous to India and is an area where the country can take a lot of pride. This is mainly because of its pre-eminence as a foreign exchange earner and its contributions to the country's GNP. In all aspects of tea production, consumption and export, India has emerged to be the world leader, mainly because it accounts for 31% of global production. It is perhaps the only industry where India has retained its leadership over the last 150 years. Tea production in India has a very interesting history to it. The range of tea offered by India - from the original Orthodox to CTC and Green Tea, from the aroma and flavour of Darjeeling Tea to the strong Assam and Nilgiri Tea- remains unparalleled in the world.

RESOURCES:

West Bengal is the second largest tea growing state in the countryl contributing almost 21% of the total production in the country. There are three tea-growing zones in the state;       Darjeeling,          Terai and Dooars. Darjeeling tea is considered to be the finest in the world. There are 343 tea gardens in West Bengal covering 1,03,950 hectares planted area. Some of the major players in the Tea industry in West Bengal include Tata Tea Ltd, James Finlay & Company. Both of them together are representing world’s second largest global branded tea operations with product and brand presence in over 50 countries. Goodricke Group Ltd. (GGL) a part of the UK-based Cammelia Plc, the world’s single largest tea producer in the private sector. In India it is the third largest tea producer and the leading producer of Darjeeling tea.

GOVERNMENT POLICIES:

The tea industry in India is highly regulated. It requires licenses for its import or export. While The Tea Act, 1953 controls production and distribution activities, the Tea (Marketing) Control Order, 2003 regulates tea sales and stipulates that a defined percentage of tea produced from each garden be sold through the auction system. In addition to this central cess, States also levy sales tax on sale of tea. Profits from production and sale of tea are subject to agricultural income tax by the states. Thus, the residual income after paying corporate tax is taxed again. This tax is levied on profits accruing to gardens located in respective state. 100% foreign direct investment (FDI) in tea industry is permitted subject to compulsory divestment of 26% equity of the company in favour of an Indian partner / Indian public within five years from the date of investment.

 

Tourism: Project Opportunities in West Bengal

PROFILE:

Tourism has become an important industry in many countries of the world, both in the east and the west. Various initiatives are being taken by the Government and other organizations to promote tourism here. Tourism in India is the largest service industry, with a contribution of 6.23% to the national GDP and 8.78% of the total employment in India. India's rich history and its cultural and geographical diversity make its international tourism appeal large and diverse. It presents heritage and cultural tourism along with medical, business and sports tourism. India has one of the largest and fastest growing medical tourism sectors.

RESOURCES:

West Bengal has the widest variety of attractions in terms of tourist spots from the bustling Kolkata Megapolis with its historical and modern charms, to the zones of tranquillity like the Himalayan terrain in the north to the Sunderbans in the south. The state is endowed with all the diversities of nature that is a tourist’s dream. From the arid Chhota Nagpur plateau region in the west, forests in the north and south, mountains in the north, sea beaches in the south and rivers crisscrossing the whole of the state the varied panorama offers the discerning traveller a very wide choice and caters to the requirements of varied travel segments. More specifically, the snow capped peaks of the Himalayas, Darjeeling, referred by many as the Queen of the Hill Stations, the Darjeeling Himalayan Railway declared as a World Heritage Site, the vast tea estates of the Dooars, the famed Royal Bengal Tiger of Sunderbans, the innumerable historical landmarks of India’s and Bengal’s glorious history are all wonders for the prospective tourists.

GOVERNMENT POLICIES:

In order to develop tourism in India in a systematic manner, position it as a major engine of economic growth and to harness its direct and multiplier effects for employment and poverty eradication in an environmentally sustainable manner, the National Tourism Policy was formulated in the year 2002. Broadly, the “Policy” attempts to:-

•        Position tourism as a major engine of economic growth;

•        Harness the direct and multiplier effects of tourism for employment generation, economic development and providing impetus to rural tourism;

•        Focus on domestic tourism as a major driver of tourism growth.

•        Position India as a global brand to take advantage of the burgeoning global travel trade and the vast untapped potential of India as a destination;

•        Acknowledges the critical role of private sector with government working as a pro-active facilitator and catalyst;

•        Create and develop integrated tourism circuits based on India’s unique civilization, heritage, and culture in partnership with States, private sector and other agencies; and

•        Ensure that the tourist to India gets physically invigorated, mentally rejuvenated, culturally enriched, spiritually elevated and “feel India from within”.

 

Waste Management: Project Opportunities in West Bengal

PROFILE:

Waste management is the collection, transport, processing or disposal, managing and monitoring of waste materials. The term usually relates to materials produced by human activity, and the process is generally undertaken to reduce their effect on health, the environment or aesthetics. Waste management is a distinct practice from resource recovery which focuses on delaying the rate of consumption of natural resources. The management of wastes treats all materials as a single class, whether solid, liquid, gaseous or radioactive substances, and tried to reduce the harmful environmental impacts of each through different methods.

RESOURCES:

There are 609 hazardous waste generating units in West Bengal. Amongst the nineteen districts of the state, two districts (Darjeeling and South Dinajpur) do not generate hazardous waste. The total quantum of hazardous waste generation from West Bengal is 2,59,776.24 metric tonnes per annum. (MTPA), out of which 46 per cent (1,20,596.41 MTPA) is landfillable, 49 per cent (1,26,596.38 MTPA) is recyclable and the remaining 5 per cent (12,583.45 MTPA) is incinerable by nature. Interestingly, it was observed that the majority of hazardous waste generating units in the state is small and is generating meagre quantity of waste, whereas the units generating substantial amount of hazardous wastes are limited in number.

 

GOVERNMENT POLICIES:

The Central Government notified the Municipal Solid Wastes (Management & Handling) Rules 2000 under Sections 3, 6 and 25 of the Environment (Protection) Act 1986 for the purpose of managing municipal and urban wastes/garbage in an environmentally sound manner. Government of West Bengal are the nodal agencies for technical guidance and preparation of project report for the development of municipal solid waste management plan for the municipal authorities situated within Kolkata Metropolitan Area (KMA) and Non-KMA areas respectively. National policy on waste management is set out in the October 1998 policy statement on waste management- Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 35 of 294 | Total 2936 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 35 293 294   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Virgin Coconut Oil

The coconut is the most extensively grown and used nut in the world and the most important palm. The export of coconut and coconut products from India increased by 10.50 per cent to `1450.24 crore in 2015-2016. The increase in quantity exported of desiccated coconut, coconut oil and activated carbon when compared to previous year was 63, 23 and 13 per cent respectively. There are greater prospects for exports of coconut oil, virgin coconut oil and desiccated coconut from India in 2016-17 as the prevailing domestic price is less when compared to the international market.Virgin coconut oil (VCO) is growing in popularity as functional food oil and the public awareness of it is increasing. It is expected that VCO will experience a dramatic growth in the market. The growing demand for virgin coconut oil (VCO) in the international market is expected to directly benefit coconut farmers in the State, with the Coconut Development Board (CDB) initiating steps to help local farmers set up their own large-scale VCO units.The demand for VCO in the international market has increased considerably. In 2013-14, the export of VCO was Rs 5 crore, which increased to Rs 25 crore in 2014-15. This year, we estimate that VCO exports from India would touch Rs 75 crore.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Andhra Pradesh State Civil Supplies Corpn. Ltd. • ConfroAgros Ltd. • Diligent Industries Ltd. • K P L Oil Mills Pvt. Ltd. • Prima Industries Ltd. • Raj Oil Mills Ltd. • Sambandam Solvent Extraction Ltd.
Plant capacity: 720 MT/AnnumPlant & machinery: Rs. 15 lakhs
Working capital: -T.C.I: Cost of Project : Rs. 171 lakhs
Return: 29.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Precipitated Silica from Rice Husk Ash - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Rice milling generates a byproduct known as husk. This surrounds the paddy grain. During milling of paddy about 78 % of weight is received as rice, broken rice and bran.Rest 22 % of the weight of paddy is received as husk. This husk is used as fuel in the rice mills to generate steam for the arboiling process. This husk contains about 75 % organic volatile matter and the balance 25 % of the weight of this husk is converted into ash during the firing process, is known as rice husk ash (RHA). This RHA in turn contains around 85 % - 90 % amorphous silica.Precipitated silica is used as filler for paper & rubber as a carrier & diluents for agricultural chemicals, as an anti-caking agent, to control viscosity & thickness and as a cleansing agent in toothpastes & in cosmetics.Precipitated silica, along with fumed silica, silica sol, and silica gel, is a part of the global specialty silica market. This market is expected to exhibit positive single-digit growth through 2018 and reach a valuation of US$ 7 Bn by 2018. Precipitated silica market, which accounts for around 70% of the global speciality silica market, is also expected to witness steady growth in the next three years. The rising demand for energy efficient products in the automotive industry has resulted in the rapid growth of the global precipitated silica market.The growing toothpaste industry is also a major driver of the global precipitated silica market as precipitated silica is used as a thickening agent it the formulation of toothpaste.As a result of these factors, the global precipitated silica market is expected to expand at a 5.5% CAGR between 2015 and 2023.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • 20 Microns Ltd. • Bharucha Stone & Sand Works Pvt. Ltd. • Insilco Ltd. • Integrated Glass Materials Ltd. • Kiran Global Chems Ltd. • Mines & Rock Products (India) Pvt. Ltd. • Passary Minerals Ltd. • SonalSil-Chem Ltd.
Plant capacity: Precipitated Silica: 3,000 MT/Annum Activated Carbon (by product): 810MT/Annum Sodium Carbonate (by product): 1,200MT/AnnumPlant & machinery: Rs. 526 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 786 lakhs
Return: 27.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Jeans Manufacturing Unit - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Jeans are trousers, a type of garment, typically made from denimor dungareecloth. They come in many styles and colors. Jeans are dyed in every color of the rainbow.There are several advantages associated with denim jeans, which emerge when the denim jeans are compared with other types of clothing. It is on the basis of this advantage that people often opt to buy the denim jeans rather than other varieties of clothing (even when some of those others are considerably cheaper).One of those advantages of denim jeans over other types of clothing is in the fact that denim jeans tend to be highly durable. In India most of the denim manufacturers focus on the domestic markets as the value realisation remains higher in domestic market than in export markets.In the recent times the industry has witnessed entrance of new fabric manufacturers which is expected to make the market for denim fabric more price competitive in the coming years. The current domestic demand for denim is estimated at around 400mnmtrs,growing annuallyat around 13.5%. Although there is a slack in the market, it is still expected to grow at nearly 10% annually. The demand is projected to grow to 1,180 mnmtr in 2024-25.Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Aarvee Denims & Exports Ltd. • Arvind Lifestyle Brands Ltd. • Ashapura Garments Ltd. • Citi Global Finance Ltd. • Cotton County Retail Ltd. • Everblue Apparel Ltd. • Koutons Retail India Ltd. • Monarch Apparels (India) Ltd. • P J L Clothing (India) Pvt. Ltd. • Spykar Lifestyles Pvt. Ltd.
Plant capacity: Readymede Garment (Jeans) : 120,000 Pcs/AnnumPlant & machinery: Rs. 35 lakhs
Working capital: -T.C.I: Cost of Project : Rs. 415 lakhs
Return: 25.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Red Oxide Zinc Chromate Primer - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A primer is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface, increases paint durability, and provides additional protection for the material being painted. Zinc chromate and red oxide are two pigments that are commonly used in metal primers. Zinc chromate provides more corrosion resistance than red oxide, although red oxide is excellent for exposure to sunlight and exterior exposure. Concerned about corrosion, zinc chromate will give better corrosion resistance. The Indian paint industry has been growing at an average 15% per annum over the last decade. Growth has been consistent with the Indian GDP growth rate and in some years the industry has grown at a rate of 1.5 to 2 times higher than that of GDP growth. Construction remains the key growth sector and is driving demand for decorative and protective coatings. The sector accounts for nearly 45% of the total national investment in infrastructure and the trend is expected to continue in the future. Future market growth is expected to be in the order of 11% p.a. overall, with individual segments displaying a broader range of growth rates across the two main segments. Demand for coatings is expected to reach 3,723,500 tonnes in 2016, mainly due to impressive growth in the construction, automotive and electronic appliance (white goods) industries. As a whole there is a good scope for new entrepreneur with manufacturing of good quality of product. Few Indian Major Players are as under • A P Coatings Ltd. • Addisons Paints & Chemicals Ltd. • American Paints (India) Ltd. • Arofine Polymers Ltd. • Asian Paints Indl. Coatings Ltd. • Asian Paints Ltd. • B J N Paints India Ltd. • Berger Becker Coatings Pvt. Ltd. • Berger Paints India Ltd. • Kansai Nerolac Paints Ltd. • Surface Coating (India) Ltd. • Shalimar Paints Ltd. • Valspar (India) Coatings Corpn. Pvt. Ltd.
Plant capacity: 360,000Ltrs/AnnumPlant & machinery: Rs. 13 lakhs
Working capital: -T.C.I: Cost of Project : Rs. 42 lakhs
Return: 30.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Medium Density Fiberboard (MDF) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenu

Fiberboard is a type of engineered wood product that is made out of wood fibers. Types of fiberboard (in order of increasing density) include particle board, medium-density fiberboard, and hardboard. Fiberboard, particularly medium-density fiberboard (MDF), is heavily used in the furniture industry. MDF does not contain knots or rings, making it more uniform than natural woods during cutting and in service.However, MDF is not entirely isotropic, since the fibres are pressed tightly together through the sheet. MDF may be glued, doweled or laminated. Typical fasteners are T-nuts and pan-head machine screws. Smooth-shank nails do not hold well, and neither do fine-pitch screws, especially in the edge. Special screws are available with a coarse thread pitch, but sheet-metal screws also work well. Like natural wood, MDF may split when woodscrews are installed without pilot holes. The Indian market for particle board and plywood is estimated in value terms, at over Rs. 37 bn. Of the total market, particle board including medium density fiberboard (MDF) accounts for nearly a quarter of the market. Nearly 85% of the particle board is supplied by the organized sector. Western India has emerged as the leader in the particle board segment.India organized furniture industry is estimated at around USD 8 bn and expected to grow at a CAGR of over 25% annually. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Bajaj Eco-Tec Products Ltd. • Best Board Ltd. • Century Plyboards (India) Ltd. • Greenply Industries Ltd. • Mangalam Timber Products Ltd. • Nuchem Ltd. • Shirdi Industries Ltd.
Plant capacity: 15,000CBM/annumPlant & machinery: Rs. 1213 lakhs
Working capital: -T.C.I: Cost of Project : RS. 2050 lakhs
Return: 25.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Toughened Glass - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

It is difficult to conceive the contemporary architecture without glass.Glass is a non-crystalline amorphous solid that is often transparent and has widespread practical,technological, and decorative usage in, for example, window panes, tableware,and optoelectronics.Common glasses contain about 70% SiO2 Sodium carbonate, or soda ash decomposes, to sodium oxides as the batch of raw material melts. Consequentlyit acts as a flux. Toughened or tempered glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. A fully tempered glass is 4 to 5 times stronger than an annealed glass of similar thickness. The total market of glass was valued at Rs. 60 bn with 80% supplied by domestic producers. The industry is growing at around 8% per annum.India exports about 13,000 tonne of glass per month to the Middle East, African countries, Europe and South America. The rapid increase in the demand for toughened glass in the domestic market has resulted in a cutback in exports by as much as 60% in the last couple of years.Indian glass industry consists as elsewhere of a number of distinct segments: architecture (45% market share), automotive (15% market share), and value added glass (10% market share), mirrors and furniture (15% market share), respectively.The industry is growing at around 15% per annum. Consumption per capita of glass in India is only 1.2 kg compared 15 kg in China, 9 kg in developed countries and 35 kg in the USA.As a whole there is a good scope for new entrepreneur with manufacturing of good quality of product. Few Indian Major Players are as under • Asahi India Glass Ltd. • Atul Glass Inds. Ltd. • Auroplast India Ltd. • Cherry Fashions Ltd. • Floatglass India Ltd. • Gobind Glass &Inds. Ltd. • Gold Plus Glass Industry Ltd. • Gujarat Borosil Ltd. • Gujarat Guardian Ltd. • H N G Float Glass Ltd.
Plant capacity: 384000 Sq.Mt./AnnumPlant & machinery: Rs. 280 lakhs
Working capital: -T.C.I: Cost of Project : Rs. 729 lakhs
Return: 26.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Cashew Nut Processing with CNSL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

The cashew is a resilient and fast-growing evergreen tree that can grow to a height of 20 m (60 ft).The cashew nut is a popular dessert nut, eaten out of hand, with other mixed nuts and used in baking and confections. Sixty percent of cashews are consumed as salted nuts. It is also made into cashew butter and nut milk. The nut is high in protein, oil and also vitamins, especially thiamin. The nut makeup is 47% fat, 21% protein, and 22% carbohydrate. Three main cashew products are traded on the international market: raw nuts, cashew kernels and cashew nut shell liquid (CNSL). A fourth product, the cashew apple is generally processed and consumed locally. The raw cashew nut is the main commercial product of the cashew tree, though yields of the cashew apple are eight to ten times the weight of the raw nuts. Raw nuts are either exported or processed prior to export. Processing of the raw nuts releases the by-product CNSL that has industrial and medicinal applications.The liquid inside the shell (CNSL) represents 15 percent of the gross weight and has some attractive possible medicinal and industrial uses. CNSL is one of the few natural resins that is highly heat resistant and is used in braking systems and in paint manufacture. Cashew has gained significant social importance in India as a major foreign exchange earner bringing in foreign exchange of around US$ 500 million per annum. Cashew kernels are a high value luxury commodity with sales growing at a steady rate of 7% each year and there is every likely hood that the market will continue to remain strong.The Cashew Export Promotion Council of India (CEPCI) works to promote the export of cashew kernels and CNSL. As a whole it is a good project for new entrepreneurs to invest Few Indian Major Players are as under • Amigo Exports Ltd. • M A C Agro Inds. Ltd. • M P S Food Products Ltd. • Maiam Global Foods Ltd. • Nature Bio-Foods Ltd. • Olam Agro India Pvt. Ltd. • Padmavathi Cashews & Coffee Ltd. • Patel Food Product Ltd. • Pioneer Cashew Inds. Ltd. • Tropical Foods Ltd
Plant capacity: Cashew Nut: 750 MT/Annum Cashew Nut Shell Liquid: 630 MT/AnnumPlant & machinery: Rs. 108 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 371 lakhs
Return: 27.00%Break even: 67.00%
Add to Inquiry Add to Inquiry Basket

Dal Mill (Pulses)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

India is the still by and large vegetarian in dietary habit and heavily depends upon vegetative source to meet out its daily protein requirement. India is bound to be global leader in terms of production and consumer of pulses. Since, India is leading importer of pulses; production of pulse/legume crops has been stagnant over the years. They are the main sources of protein. The important dals in the country are Channa,Moong, Urad, Moth, turdal and Masoor, Matar etc. The pulses are used for preparing hot dishes, sweet dishes and other varieties.Pulses are the important sources of proteins, vitamins and minerals and are popularly known as “Poor man’s meat” and “rich man’s vegetable”, contribute significantly to the nutritional security of the country.India is the largest producer (25% of global production), consumer (27% of world consumption) and importer (14%) of pulses in the world. The dal milling industry in India is one of the major agro processing industries in the country. From an annual production of 13.19 million tonnes of pulse in the country, 75% of these pulses are processed by dal mills.Most of these dal mills are in concentrated parts of India in pulses producing areas such as Indore, Jalgaon, Akola and Nagpur, or in and near by major consumption centres such as Kolkata, Chennai, Mumbai, Hyderabad and Delhi. There are many agricultural universities; ICAR recognized institutions in the country which have played a large role in developing improved dal mills. Some of these institutes are PKV Akola, CFTRI-Mysore, CIAE Bhopal and a handful more. These new and improved dal mills have a de-husking efficiency of approximately 95% and the split pulses yield stands at 80-85% which largely depends on the variety of the pulse and the conditioning of the pulse grain. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Agrimony Commodities Ltd. • Asian Health &Nutri Foods Ltd. • Bafna Agro Inds. Ltd. • Eco Farms (India) Pvt. Ltd. • Edible Products (India) Ltd. • Kumar Food Inds. Ltd. • Poona Dal & Oil Inds. Ltd. • Tata Chemicals Ltd.
Plant capacity: Pigeon peas: 12,000 MT/Annum Green Gram : 12,000 MT/Annum Chickpeas: 12,000 MT/AnnumPlant & machinery: Rs. 1908 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 3128 lakhs
Return: 28.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

PVC Flex Banner - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing used in billboard, display, banners and exhibition booth decoration.PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing used in billboard, display, banners and exhibition booth decoration. Large format digital printing flex media, PVC sheeting for digital printing like front lit flex in various gsm 260 gsm, 280 gsm, 300 gsm, 320 gsm, 340 gsm and 440 gsm and back lit flex in 550 gsm and 610 gsm and also we have vinyl, star flex type media. PVC Flex Banner is widely demanded all across the nation due to their perfect finish, attractive look, superior quality and long life. Flex banner has many advantages, such as light in weight, good mechanical performance, low cost, etc., and it can replace traditional plastic film and other materials in many fields such as advertisement, architecture, agriculture, environmental protection, and transportation etc. These are widely used for indoor and outdoor signage, building signs and in store displays, trade show displays, outdoor displays and screen printing and billboard. These banners are easy to process, install and clean.Billboards currently represent the most popularmode of outdoor advertising accounting for around 50% of the total outdoor advertising market..Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Pioneer Polyleathers Pvt Ltd • Canadian SpecialityVinyls, Inc. • Sunlex fabrics pvt. Ltd • DCP India Private Limited
Plant capacity: 4320000 Nos./AnnumPlant & machinery: Rs. 594 lakhs
Working capital: -T.C.I: Cost of Project : Rs. 938 lakhs
Return: 26.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Paper Core

Paper cores are strong cardboard tubes or cylinders which are used in fabric, adhesive, electrical, paper product and converting industries as a sturdy base around which to wind materials for storage or distribution. Depending on the intended use of the tubes, paper cores can be made from heavy-duty thick cardboard for industries such as fabric and electrical, whereas for toilet paper or paper towels, the cores can be made from thinner, less durable cardboard or paper. Made from wood pulp fiber, paper cores can be combined with a variety of adhesives and laminates which give the core properties such as strength, water resistance or heat resistance. Made for a wide range of applications, paper cores come in virtually limitless combinations of diameter, thickness and length. Cores are manufactured to provide stable structure from the inside of a product roll. Paper core market depends on packaging industry. It is used in many industries for winding an rewinding the product, such as aluminium foil packaging,polyester film, kraft paper, duplex paper, textiles and many more. Aluminium foil industry is forecast to reach 8.7% p.a. in the coming years. The cotton yarn and other yarns market is estimated to be valued at USD 10.27 billion in 2015. It is projected to grow at a CAGR of 4.2% from 2015 to 2020.So paper core demand directly depends upon the demand of above listed products. As their market value is increasing paper core value is increasing with the same pace. Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Biltube India Ltd. • Brown Kraft Inds. Ltd. • Colourtex Ltd. • Daman Ganga Board Mills Pvt. Ltd. • Fibre Foils Ltd. • Fibre Shells Ltd. • Premier Polyfilm Ltd. • Shetron Ltd. • Wellworth Industries Ltd.
Plant capacity: 2160000 Mtrs/AnnumPlant & machinery: Rs.51 lakhs
Working capital: -T.C.I: Cost of Project : Rs.231 lakhs
Return: 29.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 35 of 294 | Total 2936 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 35 293 294   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top