Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 58 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 58 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Disposable Surgical Masks

A surgical face mask is also known as a procedure mask and purposely to be worn by health care professionals during operation procedures. It helps to catch the bacteria shed in liquid droplets and aerosols from the wearer's mouth and nose. A surgical mask is not to be confused with a respirator and is not certified as such. Surgical masks are not designed to protect the wearer from inhaling airborne bacteria or virus particles and are less effective than respirators. The TMR report reveals that the global sheet face masks market is expected to reach US$336.7 mn by the end of 2024. The global anesthesia face masks market is forecast to grow at a CAGR of 3.73% during the period 2016-2020. One trend that will boost market growth is the rising demand for disposable devices. Medical personnel worldwide are opting for disposable anesthesia face masks over traditional reusable masks. Reusable electrodes present risks of cross contamination, resulting in hospital-acquired infections or nosocomial infections. The CDC estimated that about 1.7 million people in the US have these infections every year, of which about 99,000 individuals die. which facilitates the development of new technologies and ensure a high quality product.
Plant capacity: 3,000Pcs. /DayPlant & machinery: 43 lakhs
Working capital: -T.C.I: Cost of Project: Rs194 lakhs
Return: 14.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Adhesive (Fevicol Type) Water Proofing Grade

Fevicol type adhesives come under the category of synthetic resins and latex adhesives are made from polyvinyl acetate is a thermoplastic, odorless, tasteless, non-toxic, essentially clear and colorless resin. WPA is the highest level of “wet strength.” This in itself is a misnomer in that all starch is water soluble. This type of adhesive would typically be used in the most demanding applications. In addition to using 1.5% to 2% “wet strength” resin in relation to the liquid volume of the batch, it is essential that additional starch be applied to the board. These are formulated from compounds like vinyl acetate polymers and copolymers (PVAC), ethylene vinyl acetate (EVA), acrylics, styrene-butadiene rubber (SBR), natural rubber latex and synthetic elastomers, and polyurethane (pur). Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian major players are as under • Anabond Ltd. • Arofine Polymers Ltd. • C I C O Technologies Ltd. • Century Ply boards (India) Ltd. • D I C India Ltd. • F C L Technologies & Products Ltd.
Plant capacity: 3MT/DayPlant & machinery: 38 lakhs
Working capital: -T.C.I: Cost of Project : Rs 183 lakhs
Return: 27.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Pan Masala

Pan Masala is a balanced mixture of betel leaf with lime, areca nut, clove, cardamom, mint, tobacco, essence and other ingredients. It is an agricultural product with herbal properties, also available in hygienic pack and pouches. The ingredients in pan masala vary widely, depending on personal taste and region. the paan masala is consumed by all age groups and social classes. Most people across the world eat some mouth freshener after their meal or during leisure time. Meetha Pan Masala is an Indian sweet made with betelnuts, dry date, anise seed, cardamoms, saccharine menthol and artificial flavors. Indians are so addicted to flavoured tobacco — pan masala and gutkha to be precise — that despite the ban on its manufacture and sale in 11 states so far, consumers are still getting hold of their daily fix, courtesy contraband sales. Factors like its immense popularity, constantly increasing disposable incomes, convenient packaging, aggressive advertising campaigns by manufacturers and the large-scale switching of consumers from tobacco products to pan masala are currently encouraging the growth of pan masala market. According to IMARC group, the pan masala market has reached values worth around INR 35,459 Crores in 2016 growing at a CAGR of 16.5% during 2009-2018. We actively encourage a culture of innovation, which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • Alliance One Inds. India Pvt. Ltd. • Ashok & Company Pan Bahar Ltd. • Baba Global Ltd. • Dharampal Premchand Ltd. • Dharampal Satyapal Ltd. • Dhariwal Industries Pvt. Ltd.
Plant capacity: Sada Pan Masala: 165 Kgs/Day Meetha Pan Masala: 165 Kgs/Day Zarda Pan Masala : 170 Kgs/DayPlant & machinery: 12 lakhs
Working capital: -T.C.I: Cost of Project: Rs 191 lakhs
Return: 27.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Cotton Ball (Hospital and Cosmetic Use)

A cotton ball is a ball of soft fiber that is primarily used for medical or cosmetic purposes, but can be used for other purposes such as arts and crafts or cleaning. They originate from the cotton plant, which is a shrub that is found in sub-tropical and tropical regions throughout the world. Cotton grows in bolls which are located around the seeds of the plants. Although the cotton can be used in its natural form, the fibers can be spun into other products such as bed sheets and clothing or refined and sterilized for everyday and medical uses. Cotton balls have many uses in the home and in the world of beauty. Cotton is soft and can be used for delicate applications and for making your home smell fresh and clean. One bag of cotton balls in the home could be used for many different purposes, but here are a few of the most popular uses of cotton balls. Thus, due to demand it is best to invest in this project.
Plant capacity: 1,200 Pkts/DayPlant & machinery: 43 lakhs
Working capital: -T.C.I: Cost of Project: Rs 86 lakhs
Return: 29.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

PET Preform

The most widely used thermoplastic polyester is poly ethlene terephthalate (long-chain molecule consists of repeating units shown as figure right) or (PET). The use of PET is growing very rapidly in textiles, packaging, audio, and video film, engineering resin applications, and such miscellaneous applications as cable wrap. PET is not made by a single stage process, but by the reaction between two chemicals, purified terephthalic acid (PTA) and ethylene glycol (EG). PET film's tensile strength is similar with aluminium films, and is three times that of PC and PA film. PET film is transparent. Its tensile strength can reach 1/3~1/2 of steel's if dealed by oriented draw. It's the toughest thermoplastic film. Growth in production in 2010-11 and nearly 8.5% growth in sales of PET bottles and jars. While the production increased to 518 mn pieces from 488 mn, the sales were 519 mn in 2010-11 against 479 million in the previous year. The versatility of PET as a container for food products and beverages has pushed it to the centre stage. China is largely dependent on imports and India sees it as a potential. Accordingly the 12th plan draft envisaged an annual over 23% growth in installed capacity from over 800,000 ton at end 2011-12 to over 2.3 mn ton by end of the plan period in 2016-2020. As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Ahimsa Industries Ltd. • Authentic Petro products Ltd. • Axel Polymers Ltd. • F C L Technologies & Products Ltd. • Futura Polymers Ltd. • Magnum Machines Pvt. Ltd.
Plant capacity: 100,000Nos. /DayPlant & machinery: Rs 101 lakhs
Working capital: -T.C.I: Cost of Project: Rs 290 lakhs
Return: 28.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Ready Mix Concrete with Concrete Blocks

Ready mix concrete has advantages in the area where immediate requirement of concrete mixture like in the preparation of bridge overhead roads on or the road construction. In India there is a hope to get good scope of RMC within short period. The batching, mixing, transportation, placing, compaction, finishing and curing are very complimentary operations to obtain desired good quality concrete. The good quality concrete is a homogeneous mixture of water, cement, aggregates and other admixtures. Concrete blocks for building houses were first made in Europe around 1850. The mass-production of concrete blocks under way in step with the development of the cement industry chiefly in Western Countries around 1918. These include crushed stone, gravel, sand coral, volcanic cinders, slag, foamed slag, furnace clinker etc. Ready mix concrete utilizing a continuous batching process or metered concrete system. The volumetric mobile mixer is a truck that holds sand, rock, cement, water, fiber, and some add mixtures and color depending on how the batch plant is outfitted. As a whole there is a good scope for new entrepreneur to invest in this business.
Plant capacity: Ready Mix Concrete: 300 Cu.Mtrs /day Concrete Blocks (Size 400x100x200 mm): 250 Cu.Mtrs /dayPlant & machinery: Rs 83 lakhs
Working capital: -T.C.I: Cost of Project : Rs 586 lakhs
Return: 29.00%Break even: 69.00%
Add to Inquiry Add to Inquiry Basket

Dental Materials (Alginate, GI Cement, Composite Resin & Polycarboxylate Cement)

A dental impression is a negative imprint of hard (teeth) and soft tissues in the mouth from which a positive reproduction (cast or model) can be formed. Impression material is of liquid or semi-solid nature when first mixed and placed in the mouth. It then sets to become an elastic solid (usually takes a few minutes depending upon the material), leaving an imprint of person's dentition and surrounding structures of oral cavity. Alginate is an irreversible hydrocolloid. It exists in two phases: either as a viscous liquid, or a solid gel, the transition generated by a chemical reaction. The overall setting double composition reaction is as follows: Potassium (sodium) alginate + calcium sulphate dihydrate + water ? calcium alginate + potassium (sodium) sulphate Sodium phosphate is added as a retarder which preferentially reacts with calcium ions to delay the set of the material. The market has been estimated at USD 6.2 billion in 2016 and is projected to reach USD 8.5 billion by 2021, at a CAGR of 6.5% during the forecast period from 2016 to 2021. Dental equipment is tools used to diagnose and treat dental diseases. Dental tools are used by dental professionals to examine, manipulate, restore and remove teeth and surrounding oral structures and to provide dental treatment. The end-users for this market include hospitals, dental clinics, and dental practitioners. The Global Restorative Dentistry Market is projected to Reach USD 21.27 Billion by 2022 from USD 15.60 Billion in 2017, at a CAGR of 6.4% Increase in the prevalence of dental diseases (dental caries and edentulism), rising demand for advanced cosmetic dental procedures, growing dental tourism, and increasing dental expenditure are the major factors driving the demand for restorative dentistry. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: Composite Resin Poly Carboxylate Cement (500 gms Pack): 80 Packs/ Day Glass Ionomer Cement (15 gms Packs with 10 gm Liquid): 1333 Packs/ Day Composite Resin Poly Carboxylate Cement (500 gms Pack):40 Packs/ Day Plant & machinery: 26 lakhs
Working capital: -T.C.I: Cost of Project: Rs 71 lakhs
Return: 33.00%Break even: 75.00%
Add to Inquiry Add to Inquiry Basket

Cross-Linked Sodium Carboxymethyl Cellulose

Cross-linked sodium carboxymethyl cellulose is also known as croscarmellose sodium or modified cellulose gum. Crosslinked sodium carboxymethylcellulose (CMC), croscarmellose, is prepared by the reaction of Na-CMC with acids. The raw material is usually a high viscosity sodium CMC with a low degree of substitution. The cross-linking reduces water solubility while still allowing the material to swell (like a sponge) and absorb many times its weight in water. As a result, it provides superior drug dissolution and disintegration characteristics. Cross-linked sodium carboxymethyl cellulose is used in tablets of table-top sweeteners and dietary food supplements, as it facilitates disintegration in aqueous solutions, with a maximum level of use of 30 g/kg. The global carboxymethyl cellulose (CMC) market was estimated at $1,151.7 Million in 2014 and is projected to register a CAGR of 4.2% between 2015 and 2020. Carboxymethyl cellulose (CMC) or cellulose gum is a cellulose derivative with carboxymethyl group in its chain. CMC is physiologically inert, chemically stable, odorless and tasteless substance which safe for health and environment. The growth of processed food industry, increasing pharmaceutical and cosmetics production, and the growing oil drilling activities are the major factors driving the growth of CMC market. As a whole entrepreneur can venture in this field will be successful. Few Indian major players are as under • Hexone Pharmaceuticals Ltd. • Hiranya Chemicals Pvt. Ltd. • Maple Biotech Pvt. Ltd. • Perry Impex Ltd. • Rishi Trading Co. Ltd. • Shreejal Info Hubs Ltd.
Plant capacity: Cross Linked Sodium Carboxymethyl Cellulose: 1000 Kgs./Day Plant & machinery: Rs 34 lakhs
Working capital: -T.C.I: Cost of Project : Rs 144 lakhs
Return: 27.00%Break even: 70.00%
Add to Inquiry Add to Inquiry Basket

PVC Wires and Cables

An important part of this power system is the cable system that is used exclusively to carry power from the main substations to secondary substations at load centers. Low-voltage cable is used to distribute power from the load centers to utilization equipment in conduits and ducts, even though other methods such as cable trays, direct burial for outdoor applications, and aerial cable are used. PVC and polyethylene are the two main polymer types used for wire and cable insulation, with PVC comprising about 2/3 of the insulation used for building wiring. PVC compounds used in wires and cables as per BS 600 are described in BSEN 50363-3/BS 7655-4.2. PVC wires & cables are used in home appliance, house wiring, T.V, VCR control panel, power distribution & secondary transmissions etc. Wires and cables sector basically consists of two areas: (i) power; and (ii) telecommunication. The wires and cables industry in the India has grown at a CAGR of 16.7% from INR ~ million in FY’2009 to INR ~ million in FY’2014. The electric wire and cable market in India to grow at a CAGR of 16.18% over the period 2015-2019. Indian Electrical Equipment Industry Mission Plan 2012-2022, the government has planned to make India the country of choice for the production of electrical equipment and reach an output of $100 billion by balancing exports and imports. Thus, due to demand it is best to invest in this project. Few Indian major players are as under • Apar Industries Ltd. • Asian Cables & Inds. Ltd. • Associated Engineers & Industrials Ltd. • Chandresh Cables Ltd. • Delton Cables Ltd. • Electronica Machine Tools Ltd. • Emgee Cables & Communications Ltd.
Plant capacity: PVC Wires and Cables: 10 KMTRS/Day Plant & machinery: Rs 90 lakhs
Working capital: -T.C.I: Cost of Project: Rs 444 lakhs
Return: 28.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Betel Nut (Supari) Processing

Areca nut is the nut of areca palm. Biological name of areca nut palm is Areca catechu and it is a member of the family arecaceae or palmal. It is also called betel nut, as it is usually chewed with betel leaf and lime. Betel nut is a seed of the Areca catechu, a type of palm tree. It's commonly chewed after being ground up or sliced and wrapped in leaves of the Piper betel vine that have been coated with lime. This is known as a betel quid. Tobacco or flavorful spices may also be added. The dust and ‘Chogaru’ are traditionally used as a masticatory and for tanning leather. The tannins of arecanut tan leather satisfactorily except for the colour. India is the highest producer of areca nut with a production of around 3.3 lakh tones and a total acreage under cultivation of 2.64 lakh hectares, with Karnataka and Kerala accounting for nearly 72 per cent of the total production. Over six million people are engaged in areca nut cultivation, processing and trade. More than 85 per cent of the area under cultivation is made up of small and marginal holdings. Among the two varieties white nuts have a share of 60 per cent. India is also the largest consumer with around 3.2 lakh tonnes. As a whole you can invest in this project without risk and earn profit.
Plant capacity: Supari: 500 Kgs. /Day Tannin: 33 Kgs. /Day Brushes/Rope: 250 Kgs. /Day Pan Masala: 500 Kgs. /DayPlant & machinery: Rs 42 lakhs
Working capital: -T.C.I: Cost of Project: Rs 191lakhs
Return: 27.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 58 of 295 | Total 2944 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 58 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top