Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 38 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 38 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Thermocol Moulded Items Plates and Glass - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Thermocol has been employed almost exclusively in the packing and thermoacoustic isolation sectors; utilizing new processes and sophisticated equipment has been possible to create containers for foods with a perfect retention of liquids. The disposable plastic glass and plates are manufactured by thermoforming technique. They are fast replacing conventional glass and plates. Ice-cream and other dairy products are packed in disposable cups. Besides Ice-cream industry, hotels, restaurants, canteens etc. have been increasingly using disposable items as against conventional glass-wares or ceramic cups, glass, plates and bowls. Thermocol plates, glass and cups making business is one kind of business which can never go out of date. As long as people celebrates various occasions thermocol plates, glass and cups business can never comes down. Instead of using porcelain or other material made plates these disposable plates, glass and cups are best alternate which comes in budget. Demand for foodservice disposables in the market is projected to increase 3.9 percent per year to $21.9 billion in 2019. Packaging will remain the most common product segment and will outpace service ware, napkins and other foodservice disposables. Retail and vending will be the fastest growing market, while eating and drinking places will remain dominant. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Shalimar Pack (Group of Companies) • Biopac India Corporation Limited • Windsor Industries Private Limited • Essel Kitchenware Ltd • Siliguri Poly Products Pvt. Ltd.
Plant capacity: Thermocol Glasses: 64,800 Kgs/Annum Thermocol Plates : 211,200 Kgs/AnnumPlant & machinery: Rs 30 lakhs
Working capital: -T.C.I: Cost of Project : Rs 109 lakhs
Return: 27.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Industrial Safety Leather Shoes

An Industrial Safety Leather Shoes steel-toe boot is a durable boot or shoe that has a protective reinforcement in the toe which protects the foot from falling objects or compression, usually combined with a mid sole plate to protect against punctures from below. Safety footwear now comes in many styles, including sneakers and clogs. Some are quite formal, for supervising engineers who must visit sites where protective footwear is mandatory. There are a number of different professions which require that safety shoes and personal protection equipment are worn, in order to avoid the risk of incidents and work hazards while at the job. They include the danger of slipping, suffering electric shock, chemical burns, breaking a toe or foot from a falling or rolling object and others. India is the second largest global producer of footwear after China, accounting for 9% of the global annual production of 22 billion pair as compared to China’s share of more than 60%. India annually produces ~2.1 billion pair of which, ~90% are consumed internally while remaining are exported primarily to European nations.The global industrial protective footwear market is anticipated to witness a significant growth over the forecast period, owing to the compliance with stringent regulations, mandating an elevated standard of worker and workplace safety across organizations, along with the growing concerns regarding workplace safety across the world.The global industrial protective footwear market size is expected to reach USD 6.56 billion by 2024.As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Bata India Ltd • Faizan Shoes Pvt. Ltd. • Florind Shoes Pvt. Ltd. • Lakhani India Ltd. • Liberty Shoes Ltd. • Marina Shoes Ltd.
Plant capacity: 300,000 Pairs/AnnumPlant & machinery: Rs 90 lakhs
Working capital: -T.C.I: Cost of Project: Rs 359 lakhs
Return: 27.00%Break even: 73.00%
Add to Inquiry Add to Inquiry Basket

Fruit Juice and Fruit Pulpy With Packaging

A freshly squeezed orange or fresh pulped and strained apple would supply a fruit juice drink for immediate consumption, but to expect it to maintain its quality for even a day or two was tempting providence. Nowadays, with the benefit of ultra-high temperature (UHT) pasteurisation, aseptic packaging techniques and systems, pressed juices can be stored for extended periods with very little deterioration in quality. Previously, reliance had to be places upon the use of preservatives and ‘classical’ pasteurisation at lower temperatures (70ºC+) and longer holding times. As businesses grew and production and filling lines enlarged and developed, so did understanding of the need for correct sanitization of the plant items. The progressive nature of the soft drinks industry has meant that throughout its history there have been many innovative developments, and in the early years these centred on the filling and packaging, or containedrising, of beverages. During the second half of the twentieth century, apart from the continuous move towards more efficient means of production and marketing of bottled or canned soft drink products, there was much progress in our knowledge of the constituents responsible for perceived flavour notes. Advances in instrumental analytical techniques have made it possible to identify those chemicals in natural extracts (whether of fruit or botanical origin) that provide the characteristic flavour profile. Changes in lifestyles and awareness regarding the consumption of a healthy and balanced diet have steered the growth of the global juice market. As a result of the growing consumption of vegetable and fruit juice, the global market for juice is likely to witness strong growth over the forthcoming years.The market for fruit & vegetable juice has grown at a steady rate over the last five years.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Capricorn Food Products India Ltd. • Dabur Foods Ltd. • Foods & Inns Ltd. • Maa Fruits India Pvt. Ltd. • Surya Fresh Foods Ltd. • Manpasand Beverages Ltd
Plant capacity: Mango Juice : 600,000 Ltrs/Annum Orange Juice : 600,000 Ltrs/Annum Pipeapple Juice : 600,000 Ltrs/Annum Mosami Juice : 600,000 Ltrs/Annum Mixed Fruit Juice : 600,000 Ltrs/Annum Mango Pulpy:300,000 Ltrs/Annum Orange Pulpy:: 300,000 Ltrs/AnnumPlant & machinery: Rs 83 lakhs
Working capital: -T.C.I: Cost of Project : Rs 809 lakhs
Return: 26.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Edible Oil Refinery (Sunflower Oil, Groundnut Oil & Rice Bran Oil)-Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Edible oils are a major source of nutrition. The fatty acids in edible oils are required by the body as a vehicle for carrying vitamins, and they provide energy which is twice that of the cereals. Sunflower oil is the non-volatile oil expressed from sunflower (Helianthus annuus) seeds.Groundnut is the major oilseed crop in India accounting for 45% of oilseed area and 55% of oilseed production in the country.Rice bran oil produced is mostly used for industrial purposes particularly in the soap industry and when intended to edible purposes they are further subjected to refining treatment. Oil seeds occupy a prominent position among the farming commodities in India, perhaps next only to the food crops. India occupies a premier position among the oil seeds producing countries of the world, accounting for about 10 per cent of the total output of vegetable oils and fats. It is the largest producer of ground nut, rapeseed mustard and sesame; second in respect of castor seed production, third in coconut production, forth in cottonseed and fifth in linseed. With around 8% of world oilseeds production, over 7% of global protein mealproduction, around 4% of world oil meal export, total oilseeds production of 23 mn tonne and 5.6 mn tonne of edible oil production, India is the fourth largest edible oil economy in the world valued at USD 16.5 bn (Rs. 660 bn).Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • 3 F Industries Ltd. • A D M Agro Inds. Latur&Vizag Pvt. Ltd. • Acalmar Oils & Fats Ltd. • Dhara Vegetable Oil & Foods Co. Ltd. • EmamiAgrotech Ltd. • Gemini Edibles & Fats India Pvt. Ltd.
Plant capacity: Sunflower Oil : 5,000,000 Kgs/Annum Groundnut Oil : 5,000,000 Kgs/Annum Rice Bran Oil: 5,000,000 Kgs/AnnumPlant & machinery: Rs 806 lakhs
Working capital: -T.C.I: Cost of Project : Rs 1718 lakhs
Return: 27.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Fruit Pulp ,Mango, Guava, Pomegranate, Papaya- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities,

Fruit pulp is prepared from selected varieties of fruits. Fully matured fruits are harvested and quickly transported to the fruit processing plant. The fruits are ripened in controlled ripening chambers or natural ripening in open yard. Fully ripened fruits are washed, pulped, deseeded, centrifuged, homogenized, thermally processed and filled hot to maintain sterility. Fruit Pulp/Concentrate is perfectly suited for conversion to juices, nectars, drinks, jams, fruit cheese and various other kinds of beverages. They can also be used in puddings, bakery fillings, fruit meals. Food processing sector of India plays a vital role in improving the value addition opportunities and creating surplus food for agro-food products. Presently, a mere 2.2 per cent of fruits and vegetables are processed. The National policy of India aims to increase the percentage of food being processed in the country to 10 per cent by 2016 and 25 per cent by 2025. Food processing adds value, enhances shelf life of the perishable agro-food products and encourages crop diversification. The major markets for fruit concentrates and puree market are European Union, the Middle East and the U.S. Fruit juices, concentrates and purees are traded internationally and used by a variety of industries; mainly the beverages industry. Beverage industry is the largest end-user of concentrates and purees, producing numerous drinks, nectars and syrups. Mango concentrate is base ingredient for all drinks.As a whole there is a good scope for new entrepreneur with manufacturing of good quality of product. Few Indian Major Players are as under • Canfruit Export India Ltd. • Capricorn Food Products India Ltd. • EnkayTexofoodInds. Ltd. • Fortune Foods Ltd. • Navaras Food • Tricom Fruit Products Ltd.
Plant capacity: Mango Pulp : 1200 MT/Annum Guava Pulp: 1200 MT/Annum Pomegranate Pulp: 1200 MT/Annum Papaya Pulp: 1200 MT/AnnumPlant & machinery: Rs 66 lakhs
Working capital: -T.C.I: Cost of Project: Rs 379 lakhs
Return: 28.00%Break even: 70.00%
Add to Inquiry Add to Inquiry Basket

Baby Wet Wipes and Facial Wet Tissues - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

A wet wipe, also known as a wet towel, or a moist towelette, is a small moistened piece of paper that often comes folded and individually wrapped for convenience. Wet wipes are used for cleaning purposes, like personal hygiene or household cleaning. Wet wipes are produced as air-laid paper where the fibres are carried and formed to the structure of paper by air or with nonwoven spun-lace fabric where fibers are intermingled with hydro entanglement through very high pressure of water. They are moistened with water or other liquids like isopropyl alcohol depending on the applications. The wet tissues market is a growing business. Besides cleansing tissues like wet toilet paper, baby wipes or hard surface wipes other products such as sun protection lotion or deodorants are offered as wipes. The wet tissue liquids are mostly aqueous, the cellulose is a good nutrient, the non-woven is always moderately contaminated with microorganisms and the storage temperature is nearly optimal for microbial growth. The personal care wipes market has seen consistent growth worldwide over the past decade, and there are no signs of a slowdown. According to market survey, the retail volume for personal care wipes has nearly doubled, from 93 billion units to almost 170 billion units sold, respectively. India tissue market grew with a CAGR of about 8.05% in the period of five years from 2010 to 2015, whereas wipes market has showcased the CAGR of 15.21% during the same analysis period. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Ginni Filaments Ltd. • Himalayan Skincare Pvt. Ltd. • Hindustan Unilever Ltd. • Johnson & Johnson Pvt. Ltd. • Kimberly Clark Lever Pvt. Ltd. • Pamwi Tissues Ltd.
Plant capacity: Baby Wet Wipes (100 Pcs/ Pkt.) : 3,600,000 Pkts/Annum Facial Wet Tissues (30 Pcs/ Pkt.): 3,600,000 Pkts/AnnumPlant & machinery: Rs 142 lakhs
Working capital: -T.C.I: Cost of Project: Rs 842 lakhs
Return: 29.00%Break even: 32.00%
Add to Inquiry Add to Inquiry Basket

Copper Powder By Electrolytic Process - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Copper makes vital contributions to sustaining and improving society. Copper's chemical, physical and aesthetic propertiesmake it a materialof choice in a wide range of domestic, industrial and high technology applications.The electrolytic method is probablythe most economical method for producingcooper powder; moreover the copper powder obtained from this method is the highest quality. Copper powders have been used in industrial applications for many years. Probably the best known is the self-lubricating bearing which was the first major application and still accounts for about 70% of the copper powder used. Pure copper powder is used in the electrical and the electronics industries because of its excellent electrical andthermal conductivities. Copper in powder form is used in structural parts and friction materials. The electrical industry claims a share of about 26%. The electronics and communications take another 30% share. With building construction (9%) and transportation (8%) added, the cumulative rises to about three-fourths. The other consuming sectors are engineering process and general (9%) and consumer durables (6%). Defence is also a substantial user. Another important consumer is handicraftswhich is reported to consume close to 12% of copper in India. The pioneer of copper production in India, the PSU, Hindustan Copper has charted a programme to undertake capacity expansion of 8 mines from 3.2 mntonne annually to 12.4 mntonne by end 2016-17. The projects involve an investment of USD 735 mn. Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Bimetal Bearings Ltd. • G S Organics Ltd. • Gleitlager (India) Ltd. • Mepco Industries Ltd.
Plant capacity: Copper Powder : 15,000 MT/AnnumPlant & machinery: Rs 307 lakhs
Working capital: -T.C.I: Cost of Project: Rs3050 lakhs
Return: 31.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Low Carbon Ferromanganese - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

High Carbon Ferro- manganese containing about 7% carbon is not suitable for the production of steels or other alloys containing manganese in which it is desired to maintain the carbon at low level. For the manufacture of such materials the manganese must be added either as the relatively pure metal or in the form of an addition alloy with a low content of carbon. It is a Ferro alloy with high content of manganese. It gives strength to steel and is used in making of high tension steel.Low carbon Ferro manganese is widely used in the manufacturing of tool steels, alloys steel & structural steels. Its property causes it to have a high affinity with sulphur in the steel and on combining produces Manganese Sulphide (MnS) which floats up to the metal surface. Low Carbon Ferro Manganese is used as a de-oxidizer and hence finds its usage in the manufacture of 18-8 Austenitic non magnetic stainless steel. The demand for ferro alloys has been increasing with that of alloy and special steels. There are about a dozen leading players and over 30 small producers. The industry has tied up with companies in Europe for technology inputs. The major users of alloy steel are: auto industry, railways, forgings, tubes, springs and other engineering industries.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Acme Ferro Alloys Pvt. Ltd. • Anjaney Ferro Alloys Ltd. • Balasore Alloys Ltd. • Impex Ferro Tech Ltd. • Indian Metals & Alloys Ltd. • Indsil Hydro Power & Manganese Ltd.
Plant capacity: Low Carbon Ferromanganes : 15,000 MT/AnnumPlant & machinery: Rs 371 lakhs
Working capital: -T.C.I: Cost of Project : Rs 2804 lakhs
Return: 27.00%Break even: 61.00%
Add to Inquiry Add to Inquiry Basket

Low Carbon Silicomanganese - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Low Carbon Silico Manganese which is popularly known as LCSiMn is a ferrous alloy with content of carbon, silica and manganese. A large number of steel producing companies extensively demand low carbon silico manganese for reducing total production treatment by using these at the time of slag reduction instead of HCFeMn and decarburization process. Low level carbon silico manganese is extensively appreciated for reducing the lining attack that may cause due to less fluid slag (less MnO).Low Carbon Silicomanganese, used during slag reduction instead of High Carbon Ferromanganese during decarburization, reduces the total treatment time. This also reduces the amount of oxidized manganese, and therefore the quantity of silicon needed in the slag reduction. With the growing demand of steel in the market, there has been a heavy requirement of manganese alloys. This is one of the most probable reasons as to why the manganese industry is on the bloom. After witnessing a downfall, Silico manganese prices are now slightly stable; and increased by INR 1,000-2,000/MT with demand dented as buyers were retreating due to diminishing steel margins. Silico manganese producers are clamoring to offload stock. The Indian ferroalloys producers are reportedly cutting down their Manganese alloy production and would like to exhaust stocks to enable steady cash flows amid thin price margins. Due to cutting down in production of ferro alloys, prices may increase further in a short period. Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Acme Ferro Alloys Pvt. Ltd. • Balasore Alloys Ltd. • Hi-Tech Electrothermics& Hydro Power Ltd. • Jagat Alloys Pvt. Ltd. • Padmavati Ferrous Ltd. • Shri Girija Alloy & Power (India) Pvt. Ltd.
Plant capacity: Low Carbon Silicomanganese: 15,000 MT/AnnumPlant & machinery: Rs 1422 lakhs
Working capital: -T.C.I: Cost of Project : Rs 3936 lakhs
Return: 28.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Low Carbon Ferrochrome - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Ferro-chrome, along with nickel (ferro-nickel) is the major alloying element in the production of stainless steel. Stainless steel is used in a variety of areas from cutlery to aircraft engine turbine blades. The chromium content of ferro-chrome normally varies from 45 to 75 % together with various amounts of iron, carbon and other alloying elements. Low Carbon Ferrochrome is an alloy with Carbon Percentage ranging from 0.03 to 0.10%. Low Carbon Ferrochrome are of different origin, such as, Russian, Kazakhstan, South Africa, Chinese. Low Carbon Ferrochrome in Lumps form is converted into Low Carbon Ferrochrome Powder by Grinding, Milling & Sieving process. Major Producers of Low Carbon Ferrochrome are in Russia, Kazakhstan, Brazil, Germany and China. Low Carbon Ferrochrome is added in steel where in the percentage of Chromium has to be adjusted without affecting the levels of Carbon. Low Carbon Ferrochrome Powder is used in several applications such as Welding Electrodes & Stick Electrodes. Soaring demand in China for ferrochrome, used in the production of steel, is helping Indian ferrochrome producers like Indian Metals and Ferro AlloysBSE 5.00 % (IMFA) and BalasoreAlloysBSE 4.95 %. Given the firm demand and prices in China for ferrochrome (FC) and limited global supply, most of the producers of the alloy have diverted their sales to China, resulting in supply shortage in the country. Producers of FC in India have consistently raised their offer price in the domestic market due to supply shortages. Domestic FC prices have shot up almost 60% in the last three months. Firm prices in China has also made exports more lucrative. As a whole it is a good opportunity for an entrepreneur to invest in this project. Few Indian Major Players are as under • Anjaney Ferro Alloys Ltd • Bansal Ferrous Ltd. • Ferro Alloys Corpn. Ltd. • Impex Ferro Tech Ltd. • Jagat Alloys Pvt. Ltd.
Plant capacity: Low Carbon Ferrochrome : 15,000 MT/AnnumPlant & machinery: Rs 1472 lakhs
Working capital: -T.C.I: Cost of Project: Rs 4001
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 38 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 38 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top