Brake Fluid - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue, Plant Economics
|Brake fluid is one of the most important components in a braking system. It is a type of hydraulic fluid used in brake applications in motorcycles, automobiles and light trucks. It is used to transfer force under pressure from where it is created through hydraulic lines to the braking mechanism near the wheels. It works because liquids are not appreciably compressible. Braking applications produce a lot of heat so brake fluid must have a high boiling point to remain effective and must also not freeze under normal temperatures. These requirements eliminate most water-based solutions. The quality and safety of a brake fluid is defined by its boiling point. Brake fluid can come in a number of forms, standardized under the DOT (Department of Transportation) standard. DOT 2 is essentially castor oil; DOT 3, DOT 4, and DOT 5.1 are composed of various mineral oils, glycol esters and ethers; and DOT 5 is silicone-based. Most cars used in the US use DOT 3. DOT 3 is one of several designations of brake fluid denoting a particular mixture of chemicals imparting specified ranges of boiling point. DOT 3 like DOT 4 is a polyethylene glycol based fluid. Fluids such as DOT 3 are hygroscopic and will absorb water from the atmosphere. This degrades the performance of the fluid by drastically reducing its boiling point. In a passenger car this is not much of an issue, but can be of serious concerns in race cars or motorcycles. DOT 4 is one of several designations of brake fluid denoting a particular mixture of chemicals imparting specified ranges of boiling point. The glycol brake fluids are in good demand and many manufacturers compete in a large market. Different mixes would be used depending on the aim, e.g. low price, good race performance, low moisture absorption for long life, etc. Glycol based fluids are two times less compressible than silicone type fluids, even when heated. Less compressibility of brake fluid will increase pedal feel (firmness), but in either case this effect is minimal. The US Army has used silicone brake fluid exclusively since 1982 successfully. Glycols are hygroscopic and will absorb water from the atmosphere, reducing the boiling point of the fluid and degrading hydraulic efficiency. Changing fluid on a regular basis will greatly increase the performance of the brake system, but this is often not a concern in passenger cars. On the other hand, changing fluid at least every several years will preserve the life of brake system components (by removing accumulated water and other contaminants) and increase the overall reliability of the brake system. Polyethylene glycol and other brake fluid ingredients may be corrosive to paint and finished surfaces such as chrome and thus care should be taken when working with the fluid. In the recent survey, the market of auto industry will expand to its double in the coming years. Auto lubricants have always been the highest demanded product in the past and continue to be in the present as well. The entry of latest innovations and scientific enhancements, the demand of the auto lubricant has climbed the highest peak ever. The Indian lubricants industry claims to be the sixth largest in the world. It has the presence of almost all major MNCs which include Shell, Mobil, Gulf Oil, Caltex. Some of these oil majors have even tied up or renewed old ties with public sector undertakings, thereby gaining the advantage of distribution and infrastructural networks. The industry is being constrained by high petroleum prices. Until the 1980s, lubricants produced in the country were basically simple blends based on low and medium level technologies. More sophisticated lubricants were imported and these accounted for a relatively small market. Product variation is fairly extensive depending on the requirements of the segment served. In many cases, specific customers have their own special requirements. The lubricants market was dominated by three public sector refinery companies: (i) Bharat Petroleum (ii) Indian Oil Corporation, and (iii) Hindustan Petroleum. Small contributions came in from BPL and private players like Castrol. Lubrizol India and Indian Additives came into existence for manufacturing sophisticated lubricant additives with the collaboration of Lubrizol and Chevron, respectively. There is a good market potential for this product. Any new entrepreneur venture in this field will be successful.|
|Plant capacity: 500 MT/Annum||Plant & machinery: 110 Lakhs|
|Working capital: -||T.C.I: Cost of Project : 404 Lakhs|
|Return: 43.00%||Break even: 69.00%|
|Email Us | Add to Inquiry Basket|
We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.
Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.Information
- One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
- One Crore is equivalent to ten million (10,000,000)
- T.C.I is Total Capital Investment
- We can modify the project capacity and project cost as per your requirement.
- We can also prepare project report on any subject as per your requirement.
- Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.
About NIIR PROJECT CONSULTANCY SERVICES
NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.
Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.
NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.
Products & Services